|
||||
|
||||
|
||||
|
|
||||
SKIVSPELARE OCH TILLBEHÖR
Skivspelare rengöring och städning
|
|||||
|
The Aethos stereo amplifier is housed in a brand new custom designed case. Employing four 160 W 16 Amp output transistors per channel, this delivers 156 W per channel into 6 O. The Aethos is a dual mono design using a custom wound toroidal transformer and regulated supplies for the sensitive amplification and driver stages. The pre-amplifier stage uses class-A discrete circuitry throughout. The Aethos is a no compromise product with one goal, to deliver your music as faithfully as possible. The Aethos has been built to Rega’s high standards of reliability and quality to ensure many years of musical enjoyment.
DESIGN INNOVATION Our time, effort & money have been spent on developing the circuit and construction, utilizing the highest specification of components throughout. As part of the design we have included useful features such as the switchable direct input and preamplifier output, to enable the new Aethos amplifier to be used in a wide combination of systems. The headphone socket has been integrated such that the speaker switching is performed by the output mute relay as so not to obstruct the signal path and degrade the sound quality. Rega has taken the design concepts underpinning the multi award winning and hugely successful Elex-R and Elicit-R and propelled the performance to the next level and beyond with a 125watt dual mono design with features such as fully discrete FET based line amplifier, polypropylene capacitors throughout the signal path, K-Power reservoir capacitors, power amplifier regulated supply and a high current output stage comprising of four 160w Sanken output transistors per channel. VOLUME CONTROL AND LINE AMPLIFIER TECHNOLOGY The Aethos uses a high performance combined feedback and passive volume control plus line amplifier, which was originally developed for the Elex-R. Improvements have been made to the volume control and line amplifier stages in the Aethos with the use of discrete FET input operational amplifiers using the Linear Systems LSK389 FET and the well-respected RK27 ‘Blue Velvet’ potentiometer. The feedback and input levels are varied to set the required volume level. The level and tracking between the two channels is set by the close tolerance parts in the pre-amplifier circuit and less by the actual potentiometer itself, thus keeping the mismatch of channels due to volume control tracking irregularities to a minimum, further improving on the performance of the RK27 potentiometer. As well as keeping tracking irregularities to a minimum, this method also reduces noise and input overload as the control will only ‘use’ the required gain to amplify the signal. This form of volume control is normally only found in professional broadcast environments where accurate low noise control of levels is required. POWER AMPLIFIER TECHNOLOGY The power amplifier used in the Aethos is an improved higher power version of the power amplifier used in the Elicit-R and Elex-R. The output amplifier used in the Aethos, was born after extensive research by our engineers to develop a low source impedance emitter follower Class-A driver stage. This is based around two complementary pairs of 160w Sanken Darlington output transistors. The technical and sonic improvement gained by the use of low impedance drivers is well known, however, it can feature high standing currents in the driver stage when using standard transistor configurations. By combining the low impedance driver with the Sanken Darlington transistors (with their imbedded thermal bias network running at a lower standing current), this combination forms a complementary emitter follower emulating Class-A conditions with good thermal stability and lower standing currents in the driver stage. Due to the nature of the Rega power amplifier circuit we are able to run two complete output stages in parallel, this includes the output transistors, bias network and pre diver transistor this is instead of paralleling just the output transistors as normally found. This ensures the 125 watt output is achieved with complete ease. 
Produkttester och länkar
|
Rega har uppnått stort internationellt erkännande bland både Hi-fi-recensenter, specialister och inte minst deras användare, där fanskaran växer och växer. Rega har utvecklat och producerat skivspelare i mer än 45 år. Erfarenhet, intryck och ingenjörskonst har satt Rega i en unik position som skivspelares utvecklare och tillverkare. Du får därför alltid den bästa skivspelaren för priset när du väljer en Rega
Att leverera maximal valuta för pengarna har alltid varit centralt för Rega. Inte mindre än nio produkter har valts ut som "Editors Choice" av välrenommerade The Absolute Sound, och alla skivspelaresmodeller är bland dem. Från What Hi-Fi, Årets produkt 2016, 2017 och 2018 är den nya Rega Planar 3-skivspelaren från 2016, och de fina recensionerna fortsätter naturligtvis bara. Det lyfter därmed arvet från den legendariska Rega RP-3 skivspelaren, som fick detta prisutmärkelse 5 år i rad. Det är resultat som skapar stor respekt för Rega på internationell nivå.
Tyvärr, eftersom tillverkarna inte gör manualer eller guider på alla språk, kan vi inte garantera att en lokal språkmanual ingår för artikeln.
- Om du är osäker på en manual tillgänglig på önskat språk, kontakta oss bara så gör vi vad vi kan för att hjälpa till.
|
|||||
  |
|||||
| ALLA PRISER VISAS INKL. 25% MOMS | |||||
| AV-Connection A/S • Org. nr: DK27907547 • Kærvej 71–73 • 6400 Sønderborg • Danmark • Tel. +45 7442 1078 • E-mail: [email protected] | |||||
TEL. +45 7442 1078 (DAGAR 9-17)
STORT URVAL OCH LÅGA PRISER
SNABB LEVERANS FRÅN 49 SEK
30 DAGARS RETURRÄTT MED PRISGARANTI
HI-FI STEREO
